Industry News

Polyester nonwoven fabric Polyester non-woven fabric is a non-woven fabric made from chemically treated polyester fibers. It has the characteristics of high strength, good water resistance, flame retardancy, and corrosion resistance. Polyester non-woven fabric...

Meltblown non-woven fabric is a material commonly used in medical supplies such as masks and protective clothing, and its toughness and tensile strength are crucial to the quality of the product. This article will explore how to improve the toughness of meltbl...

Most of the carriers for non-woven fabric masterbatch are polypropylene (PP), which has thermal sensitivity. If you want to improve the melt index of non-woven fabric masterbatch, there are three methods to try. Below, the editor of Jisi will briefly introduce...

The softness of polypropylene melt blown non-woven fabric varies depending on the production process and material, and is usually not very soft. The softness can be improved by adding softeners and improving the fiber structure. Polypropylene melt blown non-wo...

The performance of melt blown products mainly refers to their physical and mechanical properties, such as strength, breathability, fiber diameter, etc. Due to the complexity of the melt blown process, there are many influencing factors. Today, the editor will ...

Properties of polypropylene Polypropylene is a thermoplastic polymer that is polymerized from propylene monomer. It has the following characteristics: 1. Lightweight: Polypropylene has a lower density, usually 0.90-0.91 g/cm ³, and is lighter than water. 2. H...

With the increasing application of polypropylene materials in various fields, the requirements for their surface ability are also becoming higher and higher. However, the low surface ability of polypropylene itself imposes certain limitations on its applicatio...

Polypropylene is one of the main raw materials for non-woven fabrics, which can endow non-woven fabrics with excellent physical properties. What is non-woven fabric Non woven fabric is a new generation of environmentally friendly material that combines fibers ...

The reasons for uneven thickness of non-woven fabrics during production The shrinkage rate of fibers is relatively high Whether it is conventional fibers or low melting point fibers, if the thermal shrinkage rate of the fibers is high, it is easy to cause unev...

Many manufacturers produce non-woven fabrics that are always unqualified, sometimes with thin sides and thick middle, thin left side, or uneven softness and hardness. The main reason is that the following aspects are not done properly during the production pro...