Hello everyone! Today we will talk about the performance testing of polyester non-woven fabrics. Whether you are a manufacturer, supplier, or consumer, understanding the performance of polyester non-woven fabrics is crucial. Below, I will take you to understand the relevant testing content and process.
Testing range of polyester non-woven fabric
Insulation materials: Insulation materials used in electronic devices that require testing for tensile and tear loads.
Geotextile: Used in civil engineering, it needs to be tested for brightness coefficient and appearance quality.
Cement packaging bag: used for packaging cement, it needs to be tested for unit area mass deviation and width deviation.
Filter material: used for liquid filtration, requiring detection of effective contact angle and comprehensive index.
Wrapping cloth: used for textile wrapping, requiring testing of combustion performance and surface friction.
Testing items
Tensile load: Testing the tensile strength of a material.
Tear load: Test the tear resistance of the material.
Peel off load: Test the peel strength of the material.
Brightness coefficient: Test the glossiness of the material.
Appearance quality: Check whether there are any defects in the appearance of the material.
Length shortage: Test whether the length of the material meets the standard.
Unit area mass deviation: Test whether the unit area mass of the material is consistent.
Width deviation: Test whether the width of the material meets the standard.
Effective contact angle: testing the wettability of the material.
Composite index: a comprehensive evaluation of the performance of materials.
Testing standards
GME TM 153400-2001: Standard for polyester nonwoven fabrics.
FORD WSS-M5H21-A-1995: Standard for embossed polyester nonwoven fabric coated with urethane.
FORD WSS-M5H20-B3-2000: Standard for latex impregnated RANDOM velvet polyester nonwoven fabric.
FORD ESB-M9H105-A-1994: Standard for Heat Set Polyester Non Woven Bottom Fabric.
ASTM D5908-96: Standard Test Method for Resin Adhesive Distribution and Adhesive Penetration Analysis of Polyester Non woven Fabrics.
FORD ESB-M9H101-A-2000: Standard for polyester/urethane foam non-woven backing cloth.
Testing process ️
Communication requirements: Understand your testing needs and determine the testing scope.
Quotation: Provide a quotation based on the testing items and requirements.
Signing: Sign a contract and confidentiality agreement to begin testing.
Complete testing: The testing cycle may vary depending on the sample and its testing items/methods. Please consult a testing consultant for specific details.
Provide testing reports and provide post service.
Conclusion
If you have any questions or needs regarding the performance testing of polyester non-woven fabrics, please feel free to contact us at any time!
Dongguan Liansheng Non woven Technology Co., Ltd. was established in May 2020. It is a large-scale non-woven fabric production enterprise integrating research and development, production, and sales. It can produce various colors of PP spunbond non-woven fabrics with a width of less than 3.2 meters from 9 grams to 300 grams.
Post time: May-27-2025