The non-woven fabric slitting machine has a very good treatment effect on non-woven fabrics. It is still widely used in many non-woven fabric treatments nowadays. On the one hand, it is required that the entire life cycle of the product should achieve energy-saving, pollution reduction, consumption reduction, and efficiency improvement measures; On the other hand, the whole society advocates for clean production In order to meet the needs of green packaging, it is required that the packaged products are safe, hygienic, have good adaptability to environmental protection, and can save resources. The production and use of non-woven bags are in line with national environmental policies.
Non woven fabric slitting machine is a machine commonly used in the textile industry, which can cut large non-woven fabric materials into the required size and shape. However, sometimes the slitting machine may experience noise issues, and the following are a few possible reasons.
Blade wear
When the slitting machine is working, it often rubs against the material, resulting in blade wear. Once the blade is excessively worn, it will affect the normal operation of the machine and generate noise. Therefore, worn blades should be replaced in a timely manner to maintain the normal operation of the machine and reduce noise.
Machine looseness or damage
Long term use or suboptimal maintenance may cause the parts of the slitting machine to become loose or damaged. For example, bearings or gears may become loose or damaged, causing instability and noise in the machine. If such a situation occurs, the damaged parts should be repaired or replaced in a timely manner.
Motor misalignment
The motor of the slitting machine may cause noise problems. For example, some motors may be affected by improper installation or inappropriate power supply voltage, leading to their misalignment or overheating, and generating noise. The motor should be inspected and adjusted to maintain its normal operation and reduce noise.
Improper operation
The noise of the slitting machine may also be caused by improper operation. For example, if the operator does not hold the material in the correct posture or applies incorrect force during the cutting process, it can cause instability and buzzing of the machine. Operators should understand the normal operating procedures of the slitting machine to avoid poor working posture and operational behavior.
In short, the noise of non-woven fabric slitting machines can be caused by various factors, including blade wear, machine looseness or damage, motor misalignment, and improper operation. In order to maintain the normal operation of the slitting machine and reduce noise, it is necessary to regularly inspect and maintain the machine, and operate it according to requirements. If there is a problem, timely measures should be taken for repair and maintenance.
Dongguan Liansheng Non woven Technology Co., Ltd. was established in May 2020. It is a large-scale non-woven fabric production enterprise integrating research and development, production, and sales. It can produce various colors of PP spunbond non-woven fabrics with a width of less than 3.2 meters from 9 grams to 300 grams.
Post time: May-08-2025